您好!欢迎访问智中电子有限公司官方网站!
肇庆市高要区智中电子有限公司
4产品中心
安规电容1.0uF MPX x2 105k

安规电容1.0uF MPX x2 105k

 详情说明
TYPE:MPX
FOR INTERFERENCE SUPPRESSION CLASS X2,
AND ACROSS-THE-LINE CAPACITORS.
DESCRIPTION:
MEET STANDARDS OF:VDE,ENEC,CE,UL,CSA,CQC,KC
ELECTRICAL CHARACTERISTICS:
1.Operating temperature : -40°C ~ +110°C
2.Capacitance range : 0.001uF ~ 1.0uF
3.Capacitance tolerance :K=±10%,M=±20%
4.Rated voltage(RV) : 275VAC 50Hz~60Hz
5.Dissipation factor(DF) : 0.1% max at 1KHz 25°C
6.Testing voltage(TV) : 1200 V of RV for 60 sec
7.Insuation resistance(IR) : C ≤0.33uF , IR≥15000MΩ
(measured at RV or 500Vdc C 〉0.33uF ,IR≥5000MΩ/ uF
whichever is smaller,at 25°C)
DIMENSIONS (UNIT:MM)
CODE MDF 250/275VAC
W H T P(±1.0) d(±0.05) STYLE
102-223 0.001-0.022 12.0 11.0 5.0 10.0 0.6 A
103 0.01 18.0 11.0 5.0 15.0 0.8 A
123 0.012 18.0 11.0 5.0 15.0 0.8 A
223 0.022 18.0 11.0 5.0 15.0 0.8 A
273 0.027 18.0 11.0 5.0 15.0 0.8 A
333 0.033 18.0 11.0 5.0 15.0 0.8 A
393 0.039 18.0 11.0 5.0 15.0 0.8 A
473 0.047 18.0 11.0 5.0 15.0 0.8 A
563 0.056 18.0 11.0 5.0 15.0 0.8 A
683 0.068 18.0 11.0 5.0 15.0 0.8 A
823 0.082 18.0 12.0 6.0 15.0 0.8 A
104 0.1 13.0 12.0 6.0 10.0 0.8 A
104 0.1 18.0 12.0 6.0 15.0 0.8 A
154 0.15 18.0 14.5 8.5 15.0 0.8 A
184 0.18 18.0 14.5 8.5 15.0 0.8 A
224 0.22 18.0 14.5 8.5 15.0 0.8 A
224 0.22 26.5 16.5 7.0 22.5 0.8 A
274 0.27 26.5 17.0 8.5 22.5 0.8 A
334 0.33 18.0 15.5 9.5 15.0 0.8 A
334 0.33 26.5 17.0 8.5 22.5 0.8 A
394 0.39 26.5 19.0 10.0 22.5 0.8 A
474 0.47 18.0 19.0 10.5 15.0 0.8 A
474 0.47 26.5 19.0 10.0 22.5 0.8 A
564 0.56 32.0 20.0 11.0 27.5 0.8 A
684 0.68 32.0 20.0 11.0 27.5 0.8 A
824 0.82 32.0 22.0 13.0 27.5 0.8 A
105 1.0 17.0 11.5 19.5 15.0 0.8 A
105 1.0 32.0 22.0 13.0 27.5 0.8 A
105 1.0 32.5 25.0 16.0 27.5 0.8 A
APPLICATION FOR APPROVAL
1.Item: Metallized Polypropylene Capacitor
2.Type: MPX Series.
3.Specification.
a.Temperature Range -40°C ~ +110°C
b.Capacitance. 0.001uF~1.0uF
c.Capacitance Tolerance. K(±10%)M(±20%)
d.R.V. 275VAC
e.Dimension. Refer to standard product list (Attached Pages).
4.Performance Test
ARTICLE APPLICATION PERFORMANCE TEST METHOD
1 Appearance No defect Eye measurement or by
dial gauge
(Between terminals) Add a D.C.test Voltage
No defect,Self healable breakdown of 1200 V rated W.V for
is not counted 60 sec
2 Dielectric strength The initial changing and
discharging currents at
testing voltage shall not
exceed 1A
Between body and terminal Add a D.C.test Voltage
no defect of 1200V rated W.V.for
60sec
Test voltage:
C≤0.33uF :15000MΩ MIN
275VAC for rated voltage 275VAC
Insulation C〉0.33uF :5000MΩ.uf MIN
3 Resistance
4 Capacitance Within the Specification. Measured with frequency
5 Dissipation Factor The tangent of loss amgle:≤0.1% 1KHZ and 25°C
APPLICATION FOR APPROVAL
ARTICLE APPLICATION PERFORMANCE TEST METHOD
6 Tensile strength 1)No visible damage Tensile strength:load:1.0kg.
2)No breaking or looseing of Duration of load application:
terminal 60±5sec.
Bending strength:load:0.5kg.
The number of testing time:twice
1)No open and short circuit Variable frequency cycle:
7 Vibration happened . 10~55~10Hz/min
2)No damage in element junction Amplitude 1.5 mm;Direction
and appearance x,y,z;each direction 2 hours.
At least 75% of the circumference Solder temperature:245±5℃
8 Solderability of the immersed shall be covered Dipping time:2±0.5 sec
with new solder. Dipping depth:2±0.8mm from
the root of the terminal.
1)No visible damage; In 260±5°C solder bath
9 Resistance to 2)Capacitance change:within ±5% for 5 sec
solding heat of initial value.
1)Capacitance change:ΔC/C≤5%; Test in constant thermostatic
10 Heat resistance 2)The tangent of loss angle: oven after 2 hours deposit
changed within 150% of initial reached temperatureequilibrum
value at 1Khz 85±2℃ thermostatic oven.
3)IR≥30% of initial value
1)Capacitance change:ΔC/C≤5%; Test in constant thermostatic
11 Cold resistance 2)The tangent of loss angle: after 2 hours deposit
changed within 150% of initial reached temperature equilibrum
value at 1Khz -40±2℃ thermostatic oven.
1)Appearance: no defect; Temp.:40°C;
12 Moisture resistance 2)Test voltage:No defect,self Humidity:R.H 90%-95%
healable ability is not destoryed; Add W.V for 240±8 hours
3)Insulation resistance:≥30% of then keep the room temp.
initial value; 10 hours.
4)The tangent of loss angle:change
within 150% of initial value;
5)Cap,change: ΔC/C≤5%
1)Appearance:no defect; Add 140% of W.V.
13 Moisture 2)Insulation resistance:≥50% 85±3°C in Chamber for
resistance of initial value; then keep .Under standerd
loading 3)The tangent of loss angle: 1000H condition 2 hours.
4)change within 150% of initial
value;Cap,change: ΔC/C≤5%
DATE DAIN MARKING STANDARD NO.
2006 DAIN-102
一.MARKING
EXAMPLE
2 3 4
1
5
EXAMPLE 1
二.INDICATION
1.TYPE: MPX
2.CAPACITANCE: EXAMPLE: 104=100000PF(0.1uF)
3.CAPACITANCE TOLERANCE: K=±10%
4.RATED VOLTAGE(VAC): 275VAC
5.MEET STANDARDS OF: VDE,ENEC,CE,UL,CSA,CQC,KC
三.PRINTING INK: BLACK COLOR